PA-212/224DP(T) - WEBSITE X5 UNREGISTERED VERSION - Miro-Tronics

Go to content

Main menu:

PA-212/224DP(T)

Public Address Systems > Amplifiers > Power Amplifier
 

Feature :

- Automatic variable speed fan control by thermal sensor 25V,35V,50V,70V
  and 100V outputs for matching of speaker imp
edance (Optional)
- Designed for operation either AC main or 24V DC
- Optional FAULT DETECTOR MODULE (FD-200) makes monitoring of
  
amplifiers and loudspeaker line (short, open) failures
- An override relay contact on the output terminal board allows emergency
  
paging to be distributed through 3 wire or 4 wire system wiring that
  
requires the DC power supply
- Optional FAULT DETECTOR MODULE(FD-200)makes detection of speaker
  
line fault or amplifier fault and change from fault amplifier into stand-by
  
amplifier by FAULT STAND-BY SWITCHER UNIT (FS-3381)
- Full protection for product reliability
     Over load and speaker line short limiter circuit
     Over current limiter circuit
     In rush current protection circuit for AC POWER
- +24V DC OUT to external accessories (MAX. 500mA)
- AC power remote control (Stand-by LED)
- PGM audio muting level controller when priority control signal input
- Override audio input terminal and override control terminal
- 200Hz filter to improve sound quality
- Screw terminal for signal input to make an easy installation
- OPTIONAL FUNCTION OF DPT SERIES
     Fault monitoring of fan fault, DC fuse fault and AC fuse fault

Specification :

Input Sensitivity / Impedance  0dBu(0.775V) / 66kΩ Bal
Rated Output (RMS)  PA-212DP/DPT: 120W x 2 (total 240W)
                             
PA-224DP/DPT: 240W x 2 (total 480W)
Output Impedance      Europe                         America
                             
25V  /  50V  / 100V         25V  / 35V   / 70V
212DP/D              5.2Ω / 20.8Ω / 83.3Ω      5.2Ω / 10.4Ω / 41.7Ω
224DP/DPT          
2.6Ω / 10.4Ω / 41.7Ω       2.6Ω  / 5.2Ω  / 20.8Ω
Frequency Response  Less Than -3dB (35Hz ~ 20kHz)
Signal to Noise Ratio  More than 100dB ( "A" weight )
T.H.D  Less than 0.4% (1kHz)
Input Filter (H.P.F)  200Hz / -3dB
Power consumption  PA-212DP/DPT : 670W
                             
PA-224DP/DPT : 1300W
1/8 Power Current draw   PA-212DP/DPT : 1.4A
                                    
PA-224DP/DPT : 2.8A
1/3 Power Current draw   PA-212DP/DPT : 2.2A
                                    
PA-224DP/DPT : 4A
Rated Power Current draw   PA-212DP/DPT : 3.4A
                                       
PA-224DP/DPT : 6.6A
Power  AC 220V/60Hz, DC 24V
Dimensions (mm)  483(W) X 88(H) X 374(D)
Weight(kg)  
PA-212DP/DPT : 20kg
                 
PA-224DP/DPT : 22kg

 
Back to content | Back to main menu