TA - 1120N / 1240 - WEBSITE X5 UNREGISTERED VERSION - Miro-Tronics

Go to content

Main menu:

TA - 1120N / 1240

Public Address Systems > Amplifiers > Mixer Amplifer
 

FEATURE
- Individual 4 zone speaker selectors
- 4 seperate output selectors can be switched "ON" or "OFF" independently
  using the front panel controls
- Override assignmnet for channel 1 and 2
- Each input is combo connector to use both XLR and 1/4" phone connector
- Bass and treble tone control (for amplifier and pack module)
- External DC input
- Chime remote
- +48V phantom power for Mic 1 and Mic 2 input
- AC230V / DC24V

SPECIFICATION

Input Sensitivity / Impedance  MIC1~5:-50dBm(2.45mV),
LINE :-10dBm(245mV)
TEL Paging : -10dBm(245mV)
PACK Unit : -16dBm(245mV)
PRE OUT : +4dBm(1.23V)
AMP IN : +4dBm(1.23V)
Rated Output  TA-1120N : 120W(RMS),LOW IMP : 8Ω,5.2Ω
TA-1240 : 240W(RMS), LOW IMP : 8Ω, 2.6Ω
Output Impadance  EUROPE : 100V, AMERICA : 70V
Frequency Response(Line Input)  TA-1120N : 100V/83.3Ω, 70V/40.8Ω
TA-1240 : 100V/41.7Ω, 70V/20.4Ω
Signal to Noise Ratio  LINE : More than 70dB,
MIC : More than 60dB
T.H.D at 1kHz(Rated output)  Less than 2% 1kHz
Power consumption  TA-1120N : 337W , TA-1240 : 625W
1/8 Power Current draw  TA-1120N : 0.74A , TA-1240 : 1.35A
Rated Power Current draw  TA-1120N : 1.74A , TA-1240 : 3.48A
Power  AC 220V/60Hz, DC 24V
Dimensions m/m  483(W)x133(H)x350(D)m/m
Weight (kg)  TA-1120N : 12kg , TA-1240 : 13.5kg

 
Back to content | Back to main menu