ZA - 1120A / 1240A - WEBSITE X5 UNREGISTERED VERSION - Miro-Tronics

Go to content

Main menu:

ZA - 1120A / 1240A

Public Address Systems > Amplifiers > Zone Mixer Amplifier
 

FEATURE
- Pre-Amp in/out extension of power amplifier
- Override input on MIC 1, 2, 3
- Phantom power switch for condensor MIC
- PTT-100 input by DIN-7 connector (MIC 1)
- Individual bass and treble input control (for amplifier and pack module)
- Input gain control (Microphone line inputs 1 ~ 3)
- Tel paging and night ringer
- Recording output by RCA connerctor
- Optional module slot
  (TP-100RDS , CDR-100RDSU , CDP-100MU , DM-100 , EM-600)
- Speaker attenuator per channel by 5 step

SPECIFICATION
Input Sensitivity / impedance  MIC/LINE 1~3 : -50dBu (2.45mV) 5kΩ Bal
                       -10dBu (245mV) 5kΩ Bal
LINE 4~5 : -10dBu(245mV) 15KΩ UnBal
TEL PAGING : -10dBu(245mV) 5kΩ Bal
PACK UNIT : -10dBu (245mV) 10kΩ UnBal
REC OUT : 0dBu (775mV) 3kΩ UnBal
PRE OUT : 0dBu (775mV) 3kΩ UnBal
AMP IN : 0dBu(775mV) 10kΩ UnBal
Rated Output (RMS)  ZA-1120A : 120W (RMS)
ZA-1240A : 240W (RMS)
Direct output  LOW IMP : 4Ω , HIGH IMP : 100V
ATT.STEP(Option)  8.9V, 12.5V, 25V, 50V, 70V, 100V
Frequency Response (Line input) Less than -3dB (55Hz ~ 16kHz)
Signaln to Noise Ratio  LINE : More than 80dB ("A" Weighted)
MIC : More than 70dB ("A" Weighted)
T.H.D at 1kHz(Rated output)  Less than 0.5% 1kHz
Tone Control  Bass : ±0dB at 100Hz, Treble : ±0dB at 10kHz
Power consumption  ZA-1120A : 355W, ZA-1240A : 630W
1/8 Power Current draw  ZA-1120A : 0.8A , ZA-1240A : 1.4A
1/3 Power Current draw  ZA-1120A : 1.2A , ZA-1240A : 2A
Rated Power Current draw  ZA-1120A : 1.8A , ZA-1240A : 3.2A
Weight(kg)  ZA-1120A : 14Kg , ZA-1240A : 15Kg
Power  AC220V/60Hz , DC24V
Dimensions (m/m)  430(W) x 133(H) x 352(D) m/m

 
Back to content | Back to main menu